Mongo: Not authorized to do anything after enabling service on boot
I have been using MLab and MongoAtlas successfully for a project I'm working on. Now I'm trying to migrate the DB to local storage so that the software can write and store data without needing internet access.
The problem has come up after the initial install on an rPi3B+ running openSuse Tumbleweed. I installed it, ran mongod, then mongo. Once in the shell I ran a few simple things like show dbs without a problem.
Then I ran these two lines from this tutorial (for ubuntu 18.04): https://www.howtoforge.com/tutorial/install-mongodb-on-ubuntu/
sudo systemctl start mongodb
sudo systemctl enable mongodb
Note: the tutorial specifies mongod but that didn't work until using mongodb
After this I run into an authorization problem when using show dbs and db.createUser().
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
Even when running sudo mongo to enter the shell this is still a problem. What about that tutorial changed my ability to use the shell? Also, what would be the better way to run mongo as a service on boot up?
Thanks!
mongodb
asked Jan 6 at 2:55
EruEru
1
add a comment |
I have been using MLab and MongoAtlas successfully for a project I'm working on. Now I'm trying to migrate the DB to local storage so that the software can write and store data without needing internet access.
The problem has come up after the initial install on an rPi3B+ running openSuse Tumbleweed. I installed it, ran mongod, then mongo. Once in the shell I ran a few simple things like show dbs without a problem.
Then I ran these two lines from this tutorial (for ubuntu 18.04): https://www.howtoforge.com/tutorial/install-mongodb-on-ubuntu/
sudo systemctl start mongodb
sudo systemctl enable mongodb
Note: the tutorial specifies mongod but that didn't work until using mongodb
After this I run into an authorization problem when using show dbs and db.createUser().
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
Even when running sudo mongo to enter the shell this is still a problem. What about that tutorial changed my ability to use the shell? Also, what would be the better way to run mongo as a service on boot up?
Thanks!
mongodb
asked Jan 6 at 2:55
EruEru
1
I was just going over the openSuse Wiki: en.opensuse.org/MongoDB Created a user prior to enabling the service, confirmed login as the wiki shows but then when I enable the service I can't log in with that user. What's happening with running it as a service?
– Eru
Jan 6 at 3:12
What is MongoDB version(x,y,z)?
– Md Haidar Ali Khan
Jan 7 at 10:43
what is showing the status of MongoDB through (sudo systemctl status mongod)
– Md Haidar Ali Khan
Jan 7 at 10:44
what I ended up having to do was runmongo -u admin -p admin123 --authenticationDatabase admin. Still can't figure out what's going on and am having trouble connecting to mongo locally. Went back to using atlas for the time being.
– Eru
1 hour ago
Check the "Role" of the user and "authenticate" the user.
– Md Haidar Ali Khan
2 mins ago
add a comment |
I have been using MLab and MongoAtlas successfully for a project I'm working on. Now I'm trying to migrate the DB to local storage so that the software can write and store data without needing internet access.
The problem has come up after the initial install on an rPi3B+ running openSuse Tumbleweed. I installed it, ran mongod, then mongo. Once in the shell I ran a few simple things like show dbs without a problem.
Then I ran these two lines from this tutorial (for ubuntu 18.04): https://www.howtoforge.com/tutorial/install-mongodb-on-ubuntu/
sudo systemctl start mongodb
sudo systemctl enable mongodb
Note: the tutorial specifies mongod but that didn't work until using mongodb
After this I run into an authorization problem when using show dbs and db.createUser().
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
Even when running sudo mongo to enter the shell this is still a problem. What about that tutorial changed my ability to use the shell? Also, what would be the better way to run mongo as a service on boot up?
Thanks!
mongodb
asked Jan 6 at 2:55
EruEru
1
I have been using MLab and MongoAtlas successfully for a project I'm working on. Now I'm trying to migrate the DB to local storage so that the software can write and store data without needing internet access.
The problem has come up after the initial install on an rPi3B+ running openSuse Tumbleweed. I installed it, ran mongod, then mongo. Once in the shell I ran a few simple things like show dbs without a problem.
Then I ran these two lines from this tutorial (for ubuntu 18.04): https://www.howtoforge.com/tutorial/install-mongodb-on-ubuntu/
sudo systemctl start mongodb
sudo systemctl enable mongodb
Note: the tutorial specifies mongod but that didn't work until using mongodb
After this I run into an authorization problem when using show dbs and db.createUser().
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
Even when running sudo mongo to enter the shell this is still a problem. What about that tutorial changed my ability to use the shell? Also, what would be the better way to run mongo as a service on boot up?
Thanks!
mongodb
mongodb
asked Jan 6 at 2:55
EruEru
1
asked Jan 6 at 2:55
EruEru
1
asked Jan 6 at 2:55
EruEru
1
asked Jan 6 at 2:55
EruEru
1
asked Jan 6 at 2:55
EruEru
1
1
I was just going over the openSuse Wiki: en.opensuse.org/MongoDB Created a user prior to enabling the service, confirmed login as the wiki shows but then when I enable the service I can't log in with that user. What's happening with running it as a service?
– Eru
Jan 6 at 3:12
What is MongoDB version(x,y,z)?
– Md Haidar Ali Khan
Jan 7 at 10:43
what is showing the status of MongoDB through (sudo systemctl status mongod)
– Md Haidar Ali Khan
Jan 7 at 10:44
what I ended up having to do was runmongo -u admin -p admin123 --authenticationDatabase admin. Still can't figure out what's going on and am having trouble connecting to mongo locally. Went back to using atlas for the time being.
– Eru
1 hour ago
Check the "Role" of the user and "authenticate" the user.
– Md Haidar Ali Khan
2 mins ago
add a comment |
I was just going over the openSuse Wiki: en.opensuse.org/MongoDB Created a user prior to enabling the service, confirmed login as the wiki shows but then when I enable the service I can't log in with that user. What's happening with running it as a service?
– Eru
Jan 6 at 3:12
What is MongoDB version(x,y,z)?
– Md Haidar Ali Khan
Jan 7 at 10:43
what is showing the status of MongoDB through (sudo systemctl status mongod)
– Md Haidar Ali Khan
Jan 7 at 10:44
what I ended up having to do was runmongo -u admin -p admin123 --authenticationDatabase admin. Still can't figure out what's going on and am having trouble connecting to mongo locally. Went back to using atlas for the time being.
– Eru
1 hour ago
Check the "Role" of the user and "authenticate" the user.
– Md Haidar Ali Khan
2 mins ago
I was just going over the openSuse Wiki: en.opensuse.org/MongoDB Created a user prior to enabling the service, confirmed login as the wiki shows but then when I enable the service I can't log in with that user. What's happening with running it as a service?
– Eru
Jan 6 at 3:12
I was just going over the openSuse Wiki: en.opensuse.org/MongoDB Created a user prior to enabling the service, confirmed login as the wiki shows but then when I enable the service I can't log in with that user. What's happening with running it as a service?
– Eru
Jan 6 at 3:12
What is MongoDB version(x,y,z)?
– Md Haidar Ali Khan
Jan 7 at 10:43
What is MongoDB version(x,y,z)?
– Md Haidar Ali Khan
Jan 7 at 10:43
what is showing the status of MongoDB through (sudo systemctl status mongod)
– Md Haidar Ali Khan
Jan 7 at 10:44
what is showing the status of MongoDB through (sudo systemctl status mongod)
– Md Haidar Ali Khan
Jan 7 at 10:44
what I ended up having to do was run
mongo -u admin -p admin123 --authenticationDatabase admin. Still can't figure out what's going on and am having trouble connecting to mongo locally. Went back to using atlas for the time being.– Eru
1 hour ago
what I ended up having to do was run
mongo -u admin -p admin123 --authenticationDatabase admin. Still can't figure out what's going on and am having trouble connecting to mongo locally. Went back to using atlas for the time being.– Eru
1 hour ago
Check the "Role" of the user and "authenticate" the user.
– Md Haidar Ali Khan
2 mins ago
Check the "Role" of the user and "authenticate" the user.
– Md Haidar Ali Khan
2 mins ago
add a comment |
1 Answer
1
active
oldest
votes
As I am able to see that you are getting the following error
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
As per MongoDB documentation here To authenticate as a user, you must provide a username, password, and the authentication database associated with that user.
To authenticate using the mongo shell, either:
- Use the mongo
command-line authentication options (--username,
--password,
and --authenticationDatabase)
when connecting to the mongod
or mongos
instance, or - Connect first to the mongod
or mongos
instance, and then run the
authenticate command or the
db.auth() method against the authentication database.
Note: MongoDB Atlas natively supports authentication via LDAP. Atlas automatically syncs with your LDAP server and makes it easy for
your users to authenticate with their existing credentials
For further your ref here and here
answered 4 mins ago
Md Haidar Ali KhanMd Haidar Ali Khan
3,57762340
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "182"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdba.stackexchange.com%2fquestions%2f226422%2fmongo-not-authorized-to-do-anything-after-enabling-service-on-boot%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
As I am able to see that you are getting the following error
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
As per MongoDB documentation here To authenticate as a user, you must provide a username, password, and the authentication database associated with that user.
To authenticate using the mongo shell, either:
- Use the mongo
command-line authentication options (--username,
--password,
and --authenticationDatabase)
when connecting to the mongod
or mongos
instance, or - Connect first to the mongod
or mongos
instance, and then run the
authenticate command or the
db.auth() method against the authentication database.
Note: MongoDB Atlas natively supports authentication via LDAP. Atlas automatically syncs with your LDAP server and makes it easy for
your users to authenticate with their existing credentials
For further your ref here and here
answered 4 mins ago
Md Haidar Ali KhanMd Haidar Ali Khan
3,57762340
add a comment |
As I am able to see that you are getting the following error
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
As per MongoDB documentation here To authenticate as a user, you must provide a username, password, and the authentication database associated with that user.
To authenticate using the mongo shell, either:
- Use the mongo
command-line authentication options (--username,
--password,
and --authenticationDatabase)
when connecting to the mongod
or mongos
instance, or - Connect first to the mongod
or mongos
instance, and then run the
authenticate command or the
db.auth() method against the authentication database.
Note: MongoDB Atlas natively supports authentication via LDAP. Atlas automatically syncs with your LDAP server and makes it easy for
your users to authenticate with their existing credentials
For further your ref here and here
answered 4 mins ago
Md Haidar Ali KhanMd Haidar Ali Khan
3,57762340
add a comment |
As I am able to see that you are getting the following error
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
As per MongoDB documentation here To authenticate as a user, you must provide a username, password, and the authentication database associated with that user.
To authenticate using the mongo shell, either:
- Use the mongo
command-line authentication options (--username,
--password,
and --authenticationDatabase)
when connecting to the mongod
or mongos
instance, or - Connect first to the mongod
or mongos
instance, and then run the
authenticate command or the
db.auth() method against the authentication database.
Note: MongoDB Atlas natively supports authentication via LDAP. Atlas automatically syncs with your LDAP server and makes it easy for
your users to authenticate with their existing credentials
For further your ref here and here
answered 4 mins ago
Md Haidar Ali KhanMd Haidar Ali Khan
3,57762340
As I am able to see that you are getting the following error
"errmsg" : "not authorized on admin to execute command { listDatabases: 1.0, $db: "admin" }",
"code" : 13,
"codeName" : "Unauthorized"
As per MongoDB documentation here To authenticate as a user, you must provide a username, password, and the authentication database associated with that user.
To authenticate using the mongo shell, either:
- Use the mongo
command-line authentication options (--username,
--password,
and --authenticationDatabase)
when connecting to the mongod
or mongos
instance, or - Connect first to the mongod
or mongos
instance, and then run the
authenticate command or the
db.auth() method against the authentication database.
Note: MongoDB Atlas natively supports authentication via LDAP. Atlas automatically syncs with your LDAP server and makes it easy for
your users to authenticate with their existing credentials
For further your ref here and here
answered 4 mins ago
Md Haidar Ali KhanMd Haidar Ali Khan
3,57762340
answered 4 mins ago
Md Haidar Ali KhanMd Haidar Ali Khan
3,57762340
answered 4 mins ago
Md Haidar Ali KhanMd Haidar Ali Khan
3,57762340
answered 4 mins ago
Md Haidar Ali KhanMd Haidar Ali Khan
3,57762340
3,57762340
add a comment |
add a comment |
Thanks for contributing an answer to Database Administrators Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdba.stackexchange.com%2fquestions%2f226422%2fmongo-not-authorized-to-do-anything-after-enabling-service-on-boot%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I was just going over the openSuse Wiki: en.opensuse.org/MongoDB Created a user prior to enabling the service, confirmed login as the wiki shows but then when I enable the service I can't log in with that user. What's happening with running it as a service?
– Eru
Jan 6 at 3:12
What is MongoDB version(x,y,z)?
– Md Haidar Ali Khan
Jan 7 at 10:43
what is showing the status of MongoDB through (sudo systemctl status mongod)
– Md Haidar Ali Khan
Jan 7 at 10:44
what I ended up having to do was run
mongo -u admin -p admin123 --authenticationDatabase admin. Still can't figure out what's going on and am having trouble connecting to mongo locally. Went back to using atlas for the time being.– Eru
1 hour ago
Check the "Role" of the user and "authenticate" the user.
– Md Haidar Ali Khan
2 mins ago